The integration discovers SNMP- and IP-based devices connected on a local network.
Prerequisites
Cloudaware Breeze Agent must be deployed on a server that has access to the internal enterprise subnet.
Adding Network Segment (subnet)
Log in to your Cloudaware account → Admin.
Find Network Discovery in the list of integrations, click +Add.
To add a network segment (subnet), fill out the form:
WHERE
Name - set up a network collector name to distinguish the network subnet
Breeze agent - select the server where Cloudaware Breeze agent is installed for network discovery from the list
Subnets - insert IP address(es) of the subnet(s) in the format 1.1.1.1/24 (these will be displayed as network segments)
SNMP profile - leave as ‘None selected’ for initial setup
Click Save.
4. The green light in 'Status' for network segments means that Network Discovery integration has been successfully configured. If there is a red light, please contact support@cloudaware.com.
5. For discovery of SNMP-enabled devices (optional), set up SNMP profiles. Select the tab ‘SNMP Profile’ → Add Integration. Fill out the form:
Name - set up a meaningful name to distinguish the SNMP profile
Version - select SNMP version*
Community - insert SNMP community
Port (optional) - insert the port where SNMP is set up
*In case of using SNMPv3, insert values for User and Password and select Security Level, Authentication Protocol, Encryption Algorithm, and Encryption Password.
Click Save.
6. Once the integration is added, go to Cloudaware CMDB Navigator to view the network devices data collected under the tab 'Network Discovery'.
List of Network Discovery Objects
Cloudaware supports the following network objects:
Network Device Network Segment |