| Info |
|---|
Network Discovery is a Cloudaware integration that allows for the discovery of SNMP- and IP-based devices connected to an internal customer network. This guide explains how to add a network segment to Cloudaware. |
...
Log in to Cloudaware account → Admin.
Find Network Discovery in the list of cloud integrations. Click +Add.
Fill out the form:
WHERE
Name - insert a meaningful name for the integration
Breeze agent - select the server with Cloudaware Breeze agent installed from the list Group - insert a meaningful name for the group
Subnet - insert IP address(es) of the subnet(s) in the format 1.1.1.1/24 (IP addresses will be displayed as network segments)
Breeze Agent - select the server with Cloudaware Breeze agent installed from the list
SNMP profiles - leave as 'None selected' for initial setup Vulnerability Scanning - check this check box to enable Cloudaware vulnerability scanning for discovered network devices
Click Save.The green light in 'Status' for the network segment means that the integration has been successfully configured. If there is a red light, please contact support@cloudaware.com.
For Optional: for discovery of SNMP-enabled devices (optional), set up SNMP profiles. Select the tab 'SNMP Profile' → +ADD SNMP PROFILE.
Fill out the form:
WHERE
Name - insert a meaningful name to distinguish the SNMP profile
Version - select SNMP version*
Port (optional) - insert the port where SNMP is set up
Community - insert SNMP community
*If you use SNMPv3, insert values for User and Password. Select Security Level, Authentication Protocol, Encryption Algorithm, and provide Encryption Password.
Click Save.
To view Network Security-related data, go to Cloudaware CMDB Navigator. Select NETWORK SECURITY in the menu on the left:
...
Network Vulnerability Scanning
...