Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 26 Next »

Network Discovery is a Cloudaware integration that allows for the discovery of SNMP- and IP-based devices connected to an internal customer network. This guide explains how to add a network segment to Cloudaware.

Network Discovery - CA_logo_black.png To see the Cloudaware Network Discovery integration in action, request a demo.

Prerequisites

Cloudaware Breeze Agent must be deployed on a server that has access to the internal enterprise network.

Add Network Segment (subnet)

  1. Log in to Cloudaware account → Admin.

  2. Find Network Discovery in the list of cloud integrations. Click +Add.

  3. Fill out the form:

    WHERE

    Name - insert a meaningful name for the integration
    Breeze agent - select the server with Cloudaware Breeze agent installed from the list
    Subnet - insert IP address(es) of the subnet(s) in the format 1.1.1.1/24 (IP addresses will be displayed as network segments)
    SNMP profiles - leave as 'None selected' for initial setup
    Vulnerability Scanning - check this check box to enable Cloudaware vulnerability scanning for discovered network devices


    Click Save.

  4. The green light in 'Status' for the network segment means that the integration has been successfully configured. If there is a red light, please contact support@cloudaware.com.

  5. For discovery of SNMP-enabled devices (optional), set up SNMP profiles. Select the tab 'SNMP Profile' → +ADD SNMP PROFILE.


    Fill out the form:

    WHERE

    Name - insert a meaningful name to distinguish the SNMP profile
    Version - select SNMP version*
    Port (optional) - insert the port where SNMP is set up
    Community - insert SNMP community

    Click Save.

  6. To view Network Security-related data, go to Cloudaware CMDB Navigator. Select NETWORK SECURITY in the menu on the left:

Network Vulnerability Scanning

Cloudaware provides vulnerability scanning for discovered network devices.

To enable vulnerability scanning, check the box 'Vulnerability Scanning' when adding a Network Segment or edit the integration settings (select the integration in the list, click tree dots → Edit, and check the box).

Scan results are available on network devices' records in Cloudaware CMDB:

List of Network Discovery objects

Cloudaware supports the following network objects:

Network Device
Network Device Interface
Network Segment

  • No labels